12V / 240V Double Way Traffic Loop Detector With Traffic Directional Detection Fuction

• 
• 
• 
• 
• 

12v or 240v Double way vehicle loop detector sensor with traffic directional detection fuction for traffic safety

1. Application:

Traffic Control Application

Vehicle Counting

Toll Systems

Traffic Analysis

Parking Control Application

2. Specifications of Traffic detecting loop detector (LD-200):

3.Troubleshooting:

1. If the detector is nor working--------Press reset

2. If red led indicator is not fully it -----Check for powedr supply

3. If green led indicator : a) Blinks slowly-------It maybe because the loop is short circuit or the no: of turns

    is not enough.                

    b) blinks faster-----It maybe because the loop is open or the no: of turns is too many.

4. If no: of turns is not enough------Lower the frequency (if the frequency is still too high, you must add more turns).

5. If no: of turns is too many----Higher the frequency (if the frequency is still too low, you must remove some turns).

4. Description:

(1)Loop detectors in recent years have become a popular tool having innumerable applications in policing,

right from surveillance operations to traffic control. Automation of gates and doors

has become a popular usage of the loop detector.

(2)The loop consists of several loops of wire and consideration ,should be giving to the loop

sensitivity when installing on different surfaces. Setting the correct sensitivity allows the loop

to operate with maximum detection (8 levels via a trimpot). When detection occurs,

the detector energises 2 relays for the output (each can be configured individually).

This energising of the relay can be configured into different modes, by selecting the respective dip switch.

(3)Fault Output:   Blinks slowly: It maybe because the loop is short circuit or the no:of turns is not enough.
Blinks faster: It maybe because the loop is open or the no: of turns is too many.

(4)Modes of operation:

The LD-200 series detector may be configured for any one of the following modes:

    Presence Mode

    Pulse Mode

 AB Logic Presence Mode(Barrier Operation)

 AB Logic Pulse Mode(Counting Logic)

Ordering Information:

LD-200  single channel, boxed, 1 type 11pin connects 100-240VAC(EU standard)

LD-202  single channel, boxed, 1 type 11pin connects 12-24VADC(EU standard)

LD-205  single channel, boxed, 2 type 11pin connects 100-240VAC(USA standard)

LD-206  single channel, boxed, 2 type 11pin connects 12-24VADC(USA standard)

Tag : 

traffic light detector, inductive loop traffic detector

our other loop detector sale;
PC Housing Vehicle Loop Detector Double Channel Vehicle Detection Loop
Vehicle Counter Sensor 2 Channel Car Loop Detector Driveway Used
AC110v Intelligent 8 Levels Sensitivity Vehicle Loop Detector For Toll Station
Lightweight Inductive Loop Traffic Detector 20ms Response Times
Adjustable Emergency Vehicle Detector , Traffic Nortech Loop Detector White