D-Tek Vehicle Loop Detector 1 Type 11Pin Connects 100VAC - 240VAC

• 
• 
• 
• 
• 

Item NO.:D-Tek Vehicle Loop Detector 1 Type 11Pin Connects 100VAC - 240VAC

Noble vehicle loop detector is designed to accommodate numerours applications, can be adjusted intelligently to any environments and virtually liminating false detection.
Four selectable loop frequencies(20~80KHz) can completely eliminate any crosstalk.
Two-color LED status indicator for Detect,Power,and Loop Fault indication.
Two separate output relays

Features :

1) Reset Switch : The reset switch enables the detector to be manually reset during  commissioning and testing . This results in the detector re-tuning the sensing loop and becoming ready for vehicle detection ;
2) Selectable Pulse Time : This feature sets the length of time that the pulse relay will be energized for 1 Second or 0.5 Seconds ;
3) Pulse Relay Selection : The Pulse Relay may be configured to energize on detection of a vehicle or when the vehicle leaves the loop ;
4) Sensitivity Boost : This feature sets the undetect level to maximum sensitivity and is used to prevent loss of detection of high-bed vehicles ;
5) Switch Selectable Sensibility : 11 levers adjustable sensitivity setting are available on the switches to allow flexibility in configuration ;
6) Switch Selectable Frequency : 4 frequency settings are available to prevent cross-talk between adjacent loops ;
7) Filter Option : This option is used to provide a delay between detection of the vehicle and  switchiing of the output relay . This relay is normally used to prevent false detection of small or fast moving objects ;
8) Permanent Presence Option : This feature ensure detection of the vehicle will be maintained when the vehicle is parked over the loop for extended periods .

Specifications:

Applications:

Traffic Control Application
Vehicle Counting
Toll Systems
Traffic Analysis
Parking Control Application

Competitive Advantage:

 Self-turning range: 20-2000μH
Response Times: Turn-on 10-90MS
                Turn-off 10-90MS
Sensitivity: 16 way selectable                                        
                Highest 0.010% DL/L                                     
                Lowest 2.56% DL/L

Trade Terms
 
1. Payment: T/T, 30% deposits before production, 70% balance to be paid before delivering(Western Union or Escrow, Cash are welcomed).
2. Production lead time for samples:1-2 work days: 1-300sets: 5-7 work days: 7-10 work days: ＞500sets 10-15 work days.
3. Shipping port: Shenzhen, Mainland China.
4. MOQ: 5 sets
5: Warranty: 2 years
 
Warranty Period:
 
This product warranty is 2 years, man-made damage, natural disasters, accidents and other causes damage is not covered by warranty. After two year paid to provide products or firmware replacement parts repair.

 FAQ:

Q1: If the detector is not working?
A1: Press reset
Q2: If red led indicator is not fully lit?
A2: Check for power supply
Q3: If green led indicator blinks slowly?
A3: It maybe because the loop is short circuit or the no: of turns is not enough.
Q4: If green led indicator blinks slowly?
A4: It maybe because the loop is open or the no: of turns is too many.
Q5: If no: of turns is not enough?
A5: Lower the frequency (if the frequency is still too high, you must add more turns).
Q6: If no: of turns is too many?
A6: Higher the frequency (if the frequency is still too low, you must remove some turns). 

Tag : inductive loop detection,traffic inductive loop

our other loop detector sale;
315 MHZ 418MHZ Vehicle Loop Detector Wire Control 1000Μh 4.5VA
Inductive Loop Vehicle Detector Toll System For Barrier Gate
85-240VAC Detection Management Vehicle Loop Detector Dual Channel
Gate Barrier Operator Ultrasonic Vehicle Detector Car Speed Detector 0.2MS
White Single Traffic Loop Detector Wireless Vehicle Detection Ce Rohs

Shenzhen Noble Opto Co., Ltd.

Contact Person: Ms. Lina Liao

Tel:86-755-2765-1481

Fax:86-755-2765-1483