Model: NBTLC-WS20

 20output channels traffic signal control system can control:

Vehicle red+yellow+green 3channels, Pedestrian red+green 2channels, total 5channels in East;

 Vehicle red+yellow+green 3channels, Pedestrian red+green 2channels, total 5channels in West;

 Vehicle red+yellow+green 3channels, Pedestrian red+green 2channels, total 5channels in South;

 Vehicle red+yellow+green 3channels, Pedestrian red+green 2channels, total 5channels in North.

 

Green flash time(s)	0~59
Green Flash Frequency (Hz)	0.5
Yellow Flash Frequency (Hz)	0.5
Power Voltage	DC 12V
Nominal Output              Current Per Line	5A
Clock Precision	0.1s
With PFC+PWM	>0.8
Power Consumption	3W
Loaded Power	≤1,100V/output
Ambient(RH)	40%~95%

1. Green Conflict Test Technique

2. Power Failure Protection

3. There are 10~64 lines of signal output, and it can control 10~64 different traffic lights.

4. Night off, yellow flash. Night off and yellow flash time can change.

5. It is equipped with the manual/automatic control modes.

6. Online set feature: In the course of the setting, the controller operates normally and the confusion will not occur at the crossing. 

7. Output is Real zero cross trigger protection and high-power silicon controlled rectifier, improve the security. Even output short, it cannot damage the silicon controlled rectifier.

8. Panel display simulating the lanes and the pavements at the crossing. 

9. The operating procedure can be altered as required by the client to meet the different needs.