Model: NBTLC-20E  etherent network traffic signal controller,etherent traffic signal controller

You can setup traffic Programs and control traffic crossing via Computer in office or at home!!!

 

1.Green flash time(s):0~59

2.Green Flash Frequency (Hz):0.5

3.Yellow Flash Frequency (Hz):0.5 Power Voltage:AC 85~265V

4.Nominal Output Current Per Line:5A

5.Clock Precision:0.1s With PFC+PWM:0.8

6.Power Consumption:3W

7.Loaded Power≤1,100V/

8.output Ambient(RH):40%~95%

 

1. Green Conflict Test Technique

2. Power Failure Protection

3. There are 10~64 lines of signal output, and it can control 10~64 different traffic lights.

4. Night off, yellow flash. Night off and yellow flash time can change.

5. It is equipped with the manual/automatic control modes.

6. Online set feature: In the course of the setting, the controller operates normally and the confusion will not occur at the crossing. 

7. Output is Real zero cross trigger protection and high-power silicon controlled rectifier, improve the security. Even output short, it cannot damage the silicon controlled rectifier.

8. Panel display simulating the lanes and the pavements at the crossing. 

9. The operating procedure can be altered as required by the client to meet the different needs.